GE IS210AEPSG1B (Mark VIe Wind specific AEPS power board)

GE IS210AEPSG1B (Mark VIe Wind specific AEPS power board)

1、 Product Details
Brand: GE | Series: IS210/Mark VIe Wind | Abbreviation: AEPS (Alternative Energy Power Supply), Material Subcode: 104W8038P001
Product positioning
The Mark VIe wind power control system rack dedicated main control power board provides multi-channel isolated DC power supply for the rack CPU, communication card, and I/O module. The 1.5MW wind power model comes with a standard power supply, and the cabinet is equipped with dual power redundancy configuration (one for use and one for backup). If a single block fails, the other block will automatically switch power supply without disturbance, and the whole machine will not shut down.
core functionality
AC to multi-channel isolated DC output, providing centralized power supply to AE series communication boards, IO boards, and bridge cards in the same rack;
Integrated hardware protection for overvoltage, overcurrent, short circuit, and overheating, with built-in onboard fault self check and power status feedback to the upper system;
PCB full board three proof conformal coating (moisture-proof, dustproof, anti salt spray), suitable for harsh outdoor environments of wind power;
The original factory has not stopped production but mainly relies on inventory spare parts for circulation, with two sources of goods: brand new original and refurbished.
Product Features
Active PFC power factor correction, power efficiency>90%, EMI filtering circuit resistant to wind frequency converter harmonic interference.

2、 Technical parameters
table
Parameter Project Specification Parameters
Input power AC 100-240V 50/60Hz wide AC input
Multi channel output+5V,+12V, -12V, 24VDC, multiple isolated and regulated outputs, single channel maximum 5A output
Installation method: Mark VIe standard rack slot plug-in installation, backplane bus power supply+signal interconnection
Working temperature -20 ℃~+70 ℃; Storage -40 ℃~+85 ℃
Three proof coating for full board protection, built-in lightning protection and EMC filtering
The total weight of the machine is about 1.66kg, with standard IS210 board size
Redundant scheme with dual board parallel redundant heat backup, seamless switching in case of failure
3、 Related models
1. Same version differentiation (suffix)
IS210AEPSG1A: A version of the first generation power board (old 1.5MW wind turbine)
IS210AEPSG1BCA/IS210AEPSG1BCB: B-version derived suffix, PCB hardware consistency, firmware minor version differences, directly interchangeable
IS210AEPSG1AFC: Customized Three Defense Enhancement for Overseas Export
2. Same series supporting board (matched with the same rack)
IS210AEBIH1B (AE Bridge Communication Board), IS210AEMAH1B Analog IO Board, IS210AEDBH1B Digital Board (Complete Mark VIe Wind Turbine Rack Combination)
3. Alternative models
No upgraded version of the same model from the original factory; Same rack compatibility replacement is only available for AEPS series A/B versions, and only the same model spare parts can be replaced for faults.
4、 Application Fields
Onshore/offshore wind turbines (main): GE 1.5MW series doubly fed wind turbine Mark VIe main control system standard power supply, core power supply components of wind turbine nacelle main control cabinet;
Distributed gas turbine power station: small gas turbine Mark VIe control system cabinet power supply;
Self owned power plant waste heat power generation: GE light gas turbine DCS control rack;
Oil and gas field self owned wind farm+internal combustion unit joint control cabinet.